Basic Info.
Model NO.
LDV-200-48
Voltage Regulating Mode
Frequency Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
Two-way Transmission
Modulation System
PWM
Certification
CE, RoHS, CCC
Brand
Leyu
Transport Package
Carton
Specification
242*67*44mm
Trademark
LEYU
Origin
China
HS Code
8504401990
Production Capacity
10000pieces/Month
Product Description
| SPECIFICATION | |||
| OUTPUT | |||
| Model | LDV-200-12 | LDV-200-24 | LDV-200-36 |
| DC Voltage | 12V | 24V | 36V |
| Rated Current | 16.5A | 8.3A | 5.5A |
| Current Range | 0-16.5A | 0-8.3A | 0-5.5A |
| Rated Power | 198W | 199W | 198W |
| Ripple & Noise | 150mVp-p | 200mVp-p | 200mVp-p |
| Voltage Tolerance | ±1% | ±1% | ±1% |
| Inlet Stability | ±0.5% | ±0.5% | ±0.5% |
| Load Stability | ±0.5% | ±0.5% | ±0.5% |
| Setup, Rise, Hold Up Time | 200ms,20ms,30ms/230VAC | ||
| Voltage Range | 180~264 VAC 47~63Hz;255~373VDC | ||
| AC Current | 1.5A/230VAC | ||
| Efficiency | 82% | 84% | 85% |
| Inrush Current | Cold-start current 40A/230VAC | ||
| Over Load | 105%~135% | ||
| Protection:Hiccup mode, recovers automatically after fault condition is removed | |||
| Over Voltage | 15~17V | 30~32V | 42~44V |
| Protection:Hiccup mode, recovers automatically after fault condition is removed | |||
| High Tem. | ≥85ºC | ||
| Protection:cut off the output, recovers automatically after fault condition is removed | |||
| Working Temp., Humidity | -10ºC~+60ºC,20%~90%RH | ||
| Storage Temp., Humidity | -20ºC~+85ºC, 10%~95%RH | ||
| Temp. Coefficient | ±0.03%/ºC(0-50ºC) | ||
| Vibration | 10-500Hz,2G 10min,/1cycle,Period for 60min,Each axes | ||
| Withstand Voltage | I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC | ||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | ||
| Safety Standard | EN61347-1 EN61347-2-13 IP67 | ||
| EMC Standard | EN55015 EN61547 EN61000-3.4 CLASSB | ||
| Dimension | 215*69*43(L*W*H) | ||
| Weight | 1.3Kg | ||
| NOTE | 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. | ||
