Basic Info.
Product Description
Performance Parameters
Model | LGDD-12060 | |
Output | Dc Voltage | 12V |
Rated Current | 2A /3A/5A | |
Current Range | 0~5A | |
Rated Power | 24W/36W/60W | |
Ripple&Noise(Max) | 150mV | |
Voltage Tolerance | ±4% | |
Setup,Rise Time | 100ms/220VAC | |
Hold Up Time(Typ.) | 80ms/220VAC | |
Input | Voltage Range | 100~265VAC |
Frequency Range | 47~60Hz | |
Power Factor(Typ) | PF>0.6/220VAC | |
Efficiency(Typ) | 86% | |
Short Circuit | Protection type: recovers automatically after fault conditions is removed | |
Overlaod | Overload protection @145~160%above peak rating | |
| Over Temperature | protection typer:shut down o/p voltage.re-power on to recover |
Environment | Working Temp | -20~50ºC |
Working Humidity | 20~90% RH no-condensing (Waterproof) | |
Storage Temp Humidity | -40~ +60ºC,10~90%RH | |
Safety&Emc | Safety Standards | CE Mark (LVD) |
Withstand Voltage | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | |
NOTE
1. All parameters NOT specially mentioned are measured at 220VAC input,rated laod and 25ºC of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a12''twisted pair-wire terminated with a 0.1uf&10uf parallel capacitor.
3. Tolerance: includes set up tolerance,line regulation and load regulation.
RAQ: Q1: Are you a manufacturer or a trade company?
A1: We are a manufacturer , we have our own factory , we can guarantee the delivery and quality of our products.
Q2. Can I have a sample order for led light?
A2: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q3. What about the lead time?
A3: Samples within 3 days, big order within 1-2 weeks.
Q4. Do you have any MOQ limit for led light order?
A4: Low MOQ, 1pc for sample checking is available.
Q5. How do you ship the goods and how long does it take to arrive?
A5: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q6. What about Payment?
A6:Bank Transfer (TT), Paypal,Western Union,Trade assurance;
30% the amount should be paid before producing,the balance 70% of the payment should be paid before shipping.
Q7. Is it OK to print my logo on led light product?
A7: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q8: How to deal with the faulty?
A8: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.1%. Secondly,during the warranty period, we will repair or replace defected products.