Basic Info.
Product Description
5VDC,12VDC,15VDC,24VDC can be offered
Features:
·Universal AC input/ full range
·Protections: Short circuit/ Over load/ Over voltage/ Over · temperature
·Cooling by free air convection
·Can be installed on DIN rail TS-35/7.5 or 15
·LED indicator for power on
·100% full load burn-in test
·Fixed switching frequency at 100KHz
·1 year warranty
·Dimensions: 93*78*67mm (L*W*H)
MODEL | HDR-45-5 | HDR-45-12 | HDR-45-15 | HDR-45-24 | |
OUTPUT | DC Voltage | 5V | 12V | 15V | 24V |
Voltage Tolerance | ±2% | ±1% | ±1% | ±1% | |
Rated Current | 5A | 3.5A | 2.8A | 2A | |
Current Range | 0-5A | 0-3.5A | 0-2.8A | 0-2A | |
Rated Power | 25W | 42W | 42W | 48W | |
Ripple & Noise | 100mVp-p | 200mVp-p | 240mVp-p | 480mVp-p | |
DC Adjustment Range | 4.75-5.5V | 10.8-13.2V | 13.5-16.5V | 21.6-26.4V | |
Setup, Rise, Hold Time | 800ms,60ms,100ms/230VAC at full load | ||||
INPUT | Voltage Range | 85~264 VAC47~63 Hz;120~370VDC | |||
AC Current | 1.5 A/115 V 0.75A/ 230 V | ||||
Efficiency | 72% | 77% | 77% | 80% | |
Inrush Current | Cold start 28A/115V 56A/230V | ||||
Leakage Current | <1mA/240VAC | ||||
PROTECTION | Over Load | 105%~150% | |||
Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||
Over Voltage | 115%~135% | ||||
Protection type: Shut down o/p voltage, re-power on to recover | |||||
Over Temp | Tj 135 typically (U1) Detect on heat sink of power transistor,shut down o/p voltage, recovers automatically after temperature goes down | ||||
ENVIRONMENT | Working Temp., Humidity | -10ºC~+50ºC;20%~90 %RH | |||
Storage Temp., Humidity | -20ºC~+85ºC;10%~95 %RH | ||||
Vibration | 10~500Hz,2G 10min./1cycle, period for 60min, each along X, Y, Z axes | ||||
SAFETY | Withstand Voltage | I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC | |||
Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC | ||||
STANDARD | Safety Standard | Design refer to UL508,TUV EN60950-1 | |||
EMC Standard | Design refer to EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,ENV50204,EN55024,EN61000-6-2 | ||||
OTHERS | Weight | 0.31Kg | |||
Packing | 48pcs/16.1Kg/1.3CUFT | ||||
NOTE | 1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | ||||
HDR-30, HDR-45, HDR-60 are the same dimension.
