Basic Info.
Model NO.
S-120-15
Voltage Regulating Mode
Frequency Modulation Type
Power Supplying System
Terminal Power Distribution Equipment
Energy Transmission
Two-way Transmission
Modulation System
PFAW
Certification
CE, RoHS
Brand
Weho
Hold up Time
30ms/230VAC 12ms/115VAC at Full Load
Voltage Range
85 ~ 264VAC 120 ~ 373VDC
Frequency Range
47~63Hz
Efficiency
89%
Leakage Current
<0.75mA / 240VAC
Transport Package
Carton or Plywood Case
Specification
99mm*82mm*30mm
Trademark
Weho
Origin
Zhejiang
Production Capacity
50000/Year
Product Description
Factory direct S-120-15 120W Switching Power Supply 15V 8A for 3D Printer and LED Light
Features:
1.Full range AC 85-264V Input
2. Protections: Short circuit / Overload / Over voltage / Over temperature
3. 100% full load burn-in test
4. Low cost, high reliability
5. 24 months warranty
![Factory Direct S-120-15 120W Switching Power Supply 15V 8A for 3D Printer and LED Light](http://img6.grofrom.com/www.heweledsupply.com/226f3j00mtgvlfMzABqy/Factory-Direct-S-120-15-120W-Switching-Power-Supply-15V-8A-for-3D-Printer-and-LED-Light.webp)
![Factory Direct S-120-15 120W Switching Power Supply 15V 8A for 3D Printer and LED Light](http://img6.grofrom.com/www.heweledsupply.com/226f3j00mTrMVDBqlCoN/Factory-Direct-S-120-15-120W-Switching-Power-Supply-15V-8A-for-3D-Printer-and-LED-Light.webp)
Model | S-120-12 | S-120-15 | S-120-18 | S-120-24 | S-120-36 | S-120-48 |
DC output voltage,current | 12V 0~8.5A | 15V 0~8A | 18V 0~6.7A | 24V 0~5A | 36V 0~3.3A | 48V 0~2.5A |
Wave and noise | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p | 100mVp-p |
Inlet wire stabilily | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | ±0.2% |
Load stability | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | ±0.2% |
Efficiency | 81% | 82% | 84% | 84% | 84% | 84% |
Adjustable range for DC voltage | ±10% | ±10% | ±10% | ±10% | ±10% | ±10% |
Input voltage range | 90~132VAC/180~264VAC by switch 254~370VDC 47~63Hz | |||||
Impact current | Cold start current 30A/115VAC 60A/230VAC | |||||
Overload protection | 105% -150% cut off the output, automatic recovery | |||||
Over voltage protection | 115%-135% shut down O/P voltage, re-power on to recover | |||||
Setup, rise, hold up time | 200ms, 50ms, 20ms/230VAC at full load | |||||
Withstand voltage | I/P-O/P: 1.5kV I/P-FG: 1.5kV OP-FG: 0.5kV 1 minute | |||||
Isolation resistance | I/P-O/P I/P-FG O/P-FG: 500VDC/100MΩ | |||||
Working temperature | -10ºC~+50ºC | |||||
Dimension | 199 x 98 x 38 mm | |||||
Weight | 0.6kg | |||||
Packing | 43 x 32.5 x 24CM/30PCS/18kg |
![Factory Direct S-120-15 120W Switching Power Supply 15V 8A for 3D Printer and LED Light](http://img6.grofrom.com/www.heweledsupply.com/226f3j00mEgCVoBywekN/Factory-Direct-S-120-15-120W-Switching-Power-Supply-15V-8A-for-3D-Printer-and-LED-Light.webp)
![Factory Direct S-120-15 120W Switching Power Supply 15V 8A for 3D Printer and LED Light](http://img6.grofrom.com/www.heweledsupply.com/226f3j00wtuCiKvzkBqy/Factory-Direct-S-120-15-120W-Switching-Power-Supply-15V-8A-for-3D-Printer-and-LED-Light.webp)